Remove fingerprints at home with self-prepared products - what could be more interesting and fun. Especially since it's not so hard to do. As a kid we always indulged in this way, playing detective, and presenting ourselves as Pinkertons.
And today my son grew up and asked me to tell him about our backyard activities. That's when I remembered all the skills of a detective. Our evening was fruitful. And I will tell you how to remove fingerprints by improvised means.
What are the options?
There are many options how to remove fingerprints at home. You can use many options that come to hand. So, for example, an excellent solution would be powder - powder is extremely convenient for getting a clear trace.
A simple pencil.
For this option, you will need:
- a simple pencil;
- a knife or a blade;
- A clean sheet of paper.
To prepare an optimal remedy for fingerprinting at home, you will need an ordinary simple pencil that every schoolboy has. It is necessary to extract the lead from it and grind it well. It is important to understand that you should grind as finely as possible, otherwise the quality of the prints will suffer.
Next, it remains to take a surface, you can just take a sheet of paper, put your finger on it, and then experiment - sprinkle the place where you pressed with powder from a pencil. Then sweep it off or blow it off, and the particles of the lead will linger on the skin grease.
If there is soot, you can use it on the same principle. And also according to a similar scheme allowed to use and toner cartridges, which is essentially a powder of black.
Copper and power supply
It is necessary to take bare copper wires and connect to a separate power supply. Also take a jar and fill it with clean water. In it immerse the copper connected to the power supply. The anode and cathode will end up in the water. The copper will dissolve and there will be a brown-black sediment in the water. It remains to drain the water and dry this residue, so you will have a brown powder.
Then you should proceed as in the variant from above. A print with this method of taking it is clear, well distinguishable, and there will be no powder residue on it.
Using scotch tape
Another old homemade method of taking fingerprints involves the use of scotch tape - an ordinary small width will do.
Just take a piece of adhesive tape and stick it on top of the print, tear it off carefully, and that's it, the print is saved. And it can be kept that way for quite a long time. Such a version can even be scanned - it will be well distinguishable.
Stamp ink
Stamp paint is available in stores that specialize in the sale of office supplies. You can use it to remove prints the way the police do. From the available materials you will need:
Just smear the paint on your fingers and then transfer it to the paper. The print will be clear and visible. You can also make a complete palm print in the same way. Stamp paint does not dry over time, so it will last a long time.
Talcum powder or other powder
You can use a light powder like talcum powder to remove fingerprints. Alternatively, regular lady's powder will work as well.
It should be scooped up a little with a soft brush, then gently run it over the place where the print was left. Then you have to take the transparent adhesive tape and glue it over the print. Then everything should be carefully removed, and the film will remain an even pattern.
Scanner
First, you should wipe the scanner glass well so that it is perfectly clean. Then place your fingers on it to leave fingerprints - they will be clearly visible on the polished mirror.
Next place an ordinary cosmetic mirror on the prints instead of the lid and place it on the scan. You'll end up with a very neat and well-distinguished print.
shoe polish
- An ordinary shoe polish and shoe polish;
- an ordinary foam sponge;
- a clean sheet.
Today, many creams are just sold with the sponge included. Dip it in the cream, rub it between the boys, gently going over the sides including. Then put your finger to the paper, press, but not too hard, and roll it. Gently move it from side to side. This will leave a fairly clear mark on the paper.
Pencil and tape
Use a simple pencil to trace lines on a blank, white sheet of paper - they should form a solid canvas. Then put your finger and move it lightly over the shaded area.
The finger turns into black. Then you need to take a piece of tape and with its adhesive side lean your finger dipped in pencil. Do not forget to go around the finger on all sides. Then the print will be visible and clear.
Lighter and paper
You can also try this option. Take an ordinary blank sheet of paper, leave a fingerprint on it and warm it with a lighter. Drive it at a certain distance from the sheet. In the process of heating, the fat will fry and give a light light brown tint, which is clearly visible on a white sheet of paper.
Advantages and disadvantages of a tattoo on the palm, how to place the drawing
Tattoos on the palm are still considered a controversial topic, around which the heated debates in the salons boil. Some masters of tattoos flatly refuse to impose them, because there is a probability not to "take root" picture.
Others on the contrary consider it a new step in the field of tattoo culture. And those and other opinions have a healthy grain of reasoning. Whether or not to do the drawing is up to you to decide. However, it is worth considering all the pros and cons, so then do not accuse the master of lack of experience.
When performing a tattoo on the palm, the master is obliged to warn about the peculiarities of the pigment application. The inner surface of the brush is actively peeling, because it is constantly exposed to friction or contact with aggressive media. There is a possibility that the tattoo may not "take root" the first time and several sessions are required.
The degree of "engraftment" depends on the area. For example, the central part is more often exposed to mechanical influence. The rib of the palm is less involved, which increases the chances of achieving a successful result the first time.
Men's tattoos on the rib of the palm are usually done in black. The detailing is low, which keeps the design clearer. In girls, lettering is predominantly used. Various inscriptions decorate the rib of the palm, creating an elegant image.
Tattoo flower photo from:
The controversial points are dealt with. Now let's talk about the pros and cons of the tattoo in the palm area.
Pros of the work:
- originality;
- non-standard approach;
- A wide range for self-expression;
- The tattoo is always in the field of your attention.
Negatives:
- Poor "engraftment".
- Careful attention during the healing process, which should not be forgotten.
- Discomfort throughout the regeneration.
- High probability of individual rejection of the pigment.
Men's tattoos on the rib of the palm heal better, with minimal risk. For girls, palm tattoos are easier to penetrate due to the thin skin. For both sexes, parts of the tattoo on the back of the palm may not partially heal due to frequent contact with water and the sun.
How successful the work will be depends on the skill of the tattoo artist and individual characteristics. There is no way to know how a tattoo will lay with you if you don't try it in practice.
Where to get the marks from
As noted by experts, the best way to remove fingerprints at home from a variety of smooth, glossy surfaces. On them they remain as clear as possible, and they are visible to the naked eye.
It is also worth carefully evaluating the color of the surface. If we work with something dark, we should use light powders. For light-colored surfaces, dark powders are the best solution.
If you want to completely remove fingerprints from surfaces you've left them on, you'll have to do a lot of work. After all, even washing dishes or wiping dust off surfaces where your fingerprints were left behind won't help. Experts say that after washing dishes, for example, prints will still remain, they will be deformed, but not completely removed.
Features of tattoos on the palms
Before getting a tattoo on specific places, it is necessary to understand the physiology of the tattoo. The pigment is poured into the dermis, with a layer of epidermis over it. In order for the underlying layer to change, the skin "pushes out" the upper layers of the dermis. This is how they become part of the epidermis, so that there is active hollowing out.
And this is the main reason why the tattoo becomes pale. In places like the shoulders, shoulder blades, chest and forearm, the process is slower. In the area of the feet, palms and sinuses, the peeling is more active.
Before doing a tattoo on the palms you must remember that the hand area is exposed to increased thermal, mechanical and sun exposure. The palm is covered with a thin oily skin. It changes twice as much due to the heavy load. For this reason, the tattoo requires care.
Ouroboros tattoo, photo by:
When working on a sketch, it is important to consider the size and shape of the design. To understand how the palms will look when fully covered, find a photo of Indian mehendi. Henna is the closest to reflecting the texture of the tattoo. It is a common tradition in India to cover the palm with a drawing. From the photos you find, you will be able to determine how much you want to cover the skin.
The palm area houses the nerve centers. There is a chance that frequent piercing of these points will be painful. But we will talk about that later. It is important to remember that the master must use anesthesia with a strong effect. This means that you need to make sure in advance that you are not allergic to it.
